GB/T11835-2016 Rock Wool, Slag Wool and Its Products for Thermal Insulation Testing Machine
Product Description:
Applicable to rock wool, slag wool, glass wool and products, not to aluminum silicate wool and its products. Under a fixed load, the sample is heated at a certain temperature increase rate to reach a predetermined thickness shrinkage rate. The thermal load shrinkage temperature is obtained by interpolation by calculation.
Features:
Using a single-chip computer, multi-point program heating, heat source using hot plate, safe and reliable, long life, the instrument is equipped with a panel printer to print test results in time.
Parameters:
Composed of heating furnace, heating container and temperature sensor
Ambient temperature: room temperature to 40 ° C
Relative humidity: ≤75%
Working voltage: AC 220V ± 10V 50Hz
Heating power: 4000W
Scale measurement range: room temperature to 900 ° C
Heating rate: 5 ℃ / min ± 0.3 ℃ and 3 ℃ / min ± 0.2 ℃ can be set
Implementation method: using a microcontroller or PLC temperature control module to achieve
Heating rate: the rising rate is divided into two sections, normal temperature ~ 700 ℃ and 700 ～ 900 ℃; and the heating rate and the maximum temperature can be set, the error min ± 0.3 ℃
Thermocouple: K type
Heating furnace: ceramic fiber, chemical resistance, high temperature resistance, long-term use at 1600 ℃, short-term temperature of 1800 ℃, resistance to rapid cooling and rapid heating, not easy to crack, grouting molding, high density
Outer insulation: fire resistant
Heating furnace wire: nickel 80 chromium 20 alloy wire, temperature resistance 1350 degrees
Dimensions: 1000 × 400 × 1000mm length, width and height
Exhaust: It is required to exhaust the sample with heat
Temperature controlled heating: 0-800 ℃
Heating rate: (50 ℃ -450 ℃) 5 ℃ / min; (450 ℃ -800 ℃) 3 ℃ / min
Installation requirements:
| Installation space | 1300 × 700 × 1500mm(L*W*H) |
| Ambient environment requirements | Keep away from flammable and explosive materials and corrosive liquids and gases |
| Working environment | 20 ℃ -40 ℃ |
| Test pressure | 490Pa |
Recommend:
The high-temperature test device for thermal insulation materials is suitable for evaluating the maximum operating temperature of loosely filled thermal insulation materials, felts, blankets, blocks, boards, and pre-insulated thermal insulation products. It complies with the relevant standard requirements of GB / T17430-2015 "Evaluation Method for Maximum Use Temperature of Thermal Insulation Materials".
Product Tags:
|
|
GB/T11835-2016 Rock Or Slag Wool Fire Testing Device For Thermal Insulation Testing Machine Images
|
